标准摘要
[中文适用范围]： 本文件规定了公称尺寸为 3.2 至 31.5 的钢丝或合成纱增强液压软管和软管组件的八类和两种类型（层间有粘合剂的结构和层间无粘合剂的结构）的要求。 每个等级对于所有尺寸都有一个最大工作压力。 此类软管适用于 ISO 6743-4 中定义的液压油 HH、HL、HM、HR 和 HV，温度范围为 -40 °C 至 +100 °C（A 级和 B 级）以及 -40 °C 至 +100 °C（A 级和 B 级）和 -40 °C 至 +100 °C（A 级和 B 级）。 C 级和 D 级为 +120 °C。 本文件不包括端部配件的要求。 它仅限于软管和软管组件的性能。 软管组件最大工作压力由组件的最低最大工作压力决定。 注：用户有责任与软管制造商协商确定软管与所用流体的兼容性。 [外文原描述]： ISO 23297:2017 specifies requirements for eight classes and two types (construction with adhesive bond between layers and construction without adhesive bond between layers) of wire or synthetic yarn reinforced hydraulic hoses and hose assemblies of nominal size from 3,2 to 31,5. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR, and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +100 °C for grades A and B and −40 °C to +120 °C for grades C and D. ISO 23297:2017 does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components. NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish compatibility of the hose with the fluid to be used.
英文名称Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification