标准摘要
[中文适用范围]： 本文件规定了两种测试方法 A 和 B，用于确定传送带的组成元件之间（即层之间以及覆盖层与胎体之间）的粘合强度。 基本测试条件符合ISO 36。 它适用于所有类型的输送带结构，但含有钢丝绳加固的输送带和全厚度拉伸强度小于160 N/mm的织物增强输送带除外。 它不适用于或不适用于 ISO 21183-1[1] 中所述的轻型传送带。 注：方法 A 和 B 是替代选项，但两种方法计算的平均粘合力值可能不同。 此外，由于这两种方法可能并不同样适用于所有皮带结构，因此建议征求皮带制造商的建议。 [外文原描述]： This document specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass. Basic test conditions are in conformity with ISO 36. It is applicable to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement, and textile-reinforced belts with a full-thickness tensile strength of less than 160 N/mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1 [ 1 ] . NOTE Methods A and B are alternative options, but the mean adhesive force values calculated for the two methods can be different. Also, as both methods might not be equally suitable for all belt constructions, it is advisable that the advice of the belt manufacturer be sought.
英文名称Conveyor belts — Adhesion between constitutive elements — Test methods