自粘胶带.静态剪切附着力的测量

[中文适用范围]： 该文件规定了一系列方法，用于确定压敏胶带在平行于胶带和基材表面施加的恒定负载下保持粘附的能力。 本文件包含： ——方法 A：自粘胶带 — 垂直标准钢板剪切粘合力的测量； ——方法 B：自粘胶带 — 测量覆盖有 NIST SRM 1810A1) 标准纤维板的垂直面板的剪切粘合力； ——方法 C：自粘胶带 — 测量买卖双方同意的覆盖有纤维板的垂直面板的剪切粘合力； ——方法D：自粘带——测量施加在水平标准钢板上的长丝增强带的剪切粘合力； ——方法 E：自粘胶带 — 测量应用于覆盖有 NIST SRM 1810A1) 标准纤维板的水平面板上的长丝增强胶带的剪切粘合力； ——方法 F：自粘胶带 — 测量长丝增强胶带的剪切粘合力，该胶带应用于由买方和卖方商定的覆盖有纤维板的水平面板； ——方法 G：自粘胶带 — 在高温下停留 10 分钟后测量垂直标准钢板的剪切粘合力。 [外文原描述]： This document specifies a series of methods for the determination of the ability of a pressure sensitive tape to remain adhered under a constant load applied parallel to the surfaces of the tape and substrate. This document contains: — method A: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel; — method B: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with NIST SRM 1810A[1] standard fibreboard; — method C: Self adhesive tapes ? Measurement of shear adhesion to a vertical panel covered with a fibreboard agreed upon by the buyer and seller; — method D: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal standard steel panel; — method E: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with NIST SRM 1810A 1) standard fibreboard; — method F: Self adhesive tapes ? Measurement of shear adhesion of filament reinforced tape applied to a horizontal panel covered with a fibreboard agreed upon by the buyer and seller; — method G: Self adhesive tapes ? Measurement of shear adhesion to a vertical standard steel panel at elevated temperature after a 10 min dwell time. [1] NIST SRM 1810A is National Institute of Standards and Technology ? Standard Reference Material 1810A and is available from the Institute at Gaithersburg, Maryland MD 20899, USA.