标准摘要
[中文适用范围]： 本文件旨在与 ISO 4254-1 一起使用，规定了便携式农用谷物螺旋钻的设计和构造的安全要求及其验证。 本文件涵盖了主要用于在农场输送农业材料的传统和摆动式便携式农用螺旋钻。 本文件不涉及以下方面的设计或安全方面： ——螺旋钻； ——垃圾箱清扫； ——其他没有适合牵引的轮子的螺旋钻。 注：涵盖设备的示例如附录 A 所示。 当本文件的规定与 ISO 4254-1 中规定的规定不同时，对于已设计的机器，本文件的规定优先于 ISO 4254-1 的规定。 并根据本文件的规定建造 本文件与 ISO 4254-1 一起处理与便携式农用谷物螺旋钻按预期使用时相关的所有重大危险（如表 1 所列）、危险情况和事件并在制造商预见的条件下（见附录 B）。 本文件不适用于其发布之日之前制造的机器。 [外文原描述]： This document, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of portable agricultural grain augers. This document covers conventional and swing-away portable agricultural augers designed primarily for conveying agricultural materials on farms. This document does not deal with the design or safety aspects of: — drag augers; — bin sweeps; — other augers that do not have wheels suitable for towing. NOTE Examples of covered equipment are shown in Annex A. When provisions of this document are different from those which are stated in ISO 4254-1, the provisions of this document take precedence over the provisions of ISO 4254-1 for machines that have been designed and built according the provisions of this document This document, taken together with ISO 4254-1, deals with all the significant hazards (as listed in Table 1), hazardous situations and events relevant to portable agricultural grain augers, when they are used as intended and under the conditions foreseen by the manufacturer (see Annex B). This document is not applicable to machines manufactured before the date of its publication.
英文名称Agricultural machinery — Safety — Part 16: Portable agricultural grain augers