麻醉剂和呼吸设备.锥形连接器.第1部分:锥体和插孔(ISO 5356-1:2015)

[中文适用范围]： ISO 5356 的这一部分规定了用于麻醉和呼吸设备（例如麻醉设备）连接器的公锥体和母锥体的尺寸和规格要求。 B. 在呼吸系统、麻醉气体清除系统和汽化器中。 因此，公锥体和母锥体本身不被视为医疗器械。 ISO 5356 的这一部分规定了以下公锥和母锥的要求：8.5 毫米和 11.5 毫米，用于新生儿和儿科呼吸系统； 15mm 和 22mm，一般用于呼吸系统； 22mm母卡扣锥体（包括性能要求）； 23mm 适用于汽化器，但不适用于呼吸系统； 30 毫米，用于将呼吸系统连接到麻醉气体清除系统。 ISO 5356 的本部分未指定这些公锥体和母锥体所适用的医疗设备和配件。 外锥体和内锥体的使用要求不属于 ISO 5356 的本部分；然而，这些要求已包含或纳入特定医疗器械和配件的适当国际标准中。 注：ISO 5356-2 中规定了承重螺纹锥形连接器的要求。 [外文原描述]： ISO 5356-1:2015 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic gas scavenging systems, and vaporizers. The cones and sockets are therefore not regarded as devices in their own right. It gives requirements for the following cones and sockets: 8,5 mm and 11,5 mm sizes intended for use in neonatal and paediatric breathing systems; 15 mm and 22 mm sizes intended for general use in breathing systems; 22 mm latching sockets (including performance requirements); 23 mm size intended for use with vaporizers, but not for use in breathing systems; 30 mm size intended for the connection of a breathing system to an anaesthetic gas scavenging system. It does not specify the medical devices and accessories on which these cones and sockets are to be provided. Requirements for the application of cones and sockets are not included, but are or will be given in the relevant International Standards for specific medical devices and accessories. Requirements for screw-threaded weight-bearing connectors are specified in ISO 5356 2.