标准摘要
[中文适用范围]： 本文件规定了以下最常见的标称尺寸（以毫米为单位）： ——形状类型 6：s 直杯砂轮； ——形状类型11：锥度杯形砂轮； ——形状类型 27：用于磨削或磨削/切割的中心凹形砂轮； ——形状类型28：凹心砂轮，凹形； ——形状类型29：凹心砂轮，凸形。 这些固结磨料产品旨在用于使用手持式磨床（角磨机）对工件的任何表面进行去毛刺和修整/勾丝。 在此应用中，工件固定，磨床由操作员引导。 本文件没有规定 ISO 13942 中给出的极限偏差和跳动公差。 [外文原描述]： This document specifies the most common nominal dimensions, in millimetres, of: — shape type 6: straight cup grinding wheel; — shape type 11: taper cup grinding wheel; — shape type 27: depressed centre wheel for grinding or grinding/cutting-off; — shape type 28: depressed centre grinding wheel, concave shape; — shape type 29: depressed centre grinding wheel, convex shape. These bonded abrasive products are intended to be used for deburring and fettling/snagging of any surface of a workpiece using hand-held grinding machines (angle grinder). In this application, the workpiece is fixed and the grinding machine is guided by the operator. This document does not specify limit deviations and run-out tolerances, which are given in ISO 13942.
英文名称Bonded abrasive products — Dimensions — Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder