粘合磨料产品.尺寸.第15部分:固定或移动切割机上的切割轮

[中文适用范围]： 本文件规定了以下最常见的标称尺寸（以毫米为单位）： ——形状类型 41：平面切割轮； ——形状类型 42：凹心切割轮。 这些固结磨料产品旨在用于使用固定或移动切割机（手动和机械引导）切割任何工件。 在手动引导的应用中，工件通过自身重量被牢固地夹紧或稳定。 切割轮由操作者引导，工件固定，反之亦然。 本文件没有规定 ISO 13942 中给出的极限偏差和跳动公差。 [外文原描述]： This document specifies the most common nominal dimensions, in millimetres, of: — shape type 41: flat cutting-off wheel; — shape type 42: depressed centre cutting-off wheel. These bonded abrasive products are intended to be used for cutting‑off of any workpiece using stationary or mobile cutting-off machines, both manually and mechanically guided. In the application that is manually guided, the workpiece is firmly clamped or stabilized by its own weight. The cutting‑off wheel is guided by the operator and the workpiece is fixed, or vice versa. This document does not specify limit deviations and run‑out tolerances, which are given in ISO 13942.