小艇.远程机械转向系统

[中文适用范围]： 本文件规定了小型船舶的远程机械缆索转向系统以及舵、喷气驱动器、舷外和船尾驱动发动机的输出冲压接口点的设计、构造、安装和测试要求。 它适用于各种类型船舶上使用的三类不同类型的转向系统： ——标准负载转向系统，适用于装有单台和双台舷外发动机、总功率超过 15 kW 并配有舵、尾机驱动器和水的小型船舶-喷气驱动器； ——轻型转向系统，适用于配备 15 kW 至 40 kW 功率的单舷外发动机的小型船舶； ——小型喷气式转向系统，不包括私人船只。 注意 标准和轻型转向系统在机械上可以互换。 标准负载转向系统可用于为轻型系统设计的飞行器。 然而，轻型转向系统不能用于需要标准负载转向系统的船只。 微型喷气机转向系统在机械上与前面提到的系统不同，并且只能用于本文件中定义的微型喷气机。 本文件不涉及驾驶飞行器的紧急手段。 [外文原描述]： This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft. It is applicable to three distinct classes of steering systems for use on various types of craft: — standard duty steering systems, for small craft with single and twin installations of outboard engines with a total over 15 kW power, and with rudders, sterndrives and water-jet drives; — light duty steering systems, for small craft with a single outboard engine of 15 kW to 40 kW power; — mini-jet steering systems, excluding personal watercraft. NOTE Standard and light duty steering systems are mechanically interchangeable. A standard duty steering system can be used on a craft designed for a light duty system. However, a light duty steering system cannot be used on a craft that requires a standard duty steering system. Mini-jet steering systems are mechanically differentiated from the previously mentioned systems and can only be used on mini-jet craft as defined in this document. This document does not address emergency means for steering the craft.