信息技术 信息交换用3 81mm宽盒式磁带 螺旋扫描记录 使用磁带长度为60m和90m的DATA/DAT-DC格式

[中文适用范围]： 指定物理和磁性特性。 还规定了记录信号的质量、记录格式和记录方法，从而允许通过此类磁带盒在驱动器之间进行数据交换。 指定两种类型的磁带，称为 A 型（标称厚度为 13 锤、标称长度最长为 60.5 m 的磁带）和 B 型（标称厚度为 9 锤、标称长度最长为 60.5 m 的磁带）至 92.0 m）。 [外文原描述]： This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. The format used is known as DATA/DAT-DC. This International Standard specifies two types of cartridges which, for the purpose of this International Standard, are referred to as Type A and Type B. For Type A, the magnetic tape has a nominal thickness of 13 μm and a nominal length of up to 60,5 m. For Type B, the magnetic tape has a nominal thickness of 9 μm a length of up to 92,0 m. Information interchange between systems by means of this International Standard also requires the use, at a minimum, of a labelling and file structure and an interchange code which are agreed upon by the interchange parties. It is not within the scope of this International Standard to specify the labelling and file structure, or the interchange code.