标准摘要
[中文适用范围]： 本文档定义了物联网（IOT）管理与控制设备，识别了名为“物联网管理与控制”的设备的第一级。此公共可用规范适用于包含该设备的 UPnP 论坛标准化设备控制协议（DCP）。该设备定义符合 UPnP 设备架构版本 1.0。它定义了一种 referred 为“物联网管理与控制设备”的设备类型。本规范定义了一种通用设备，可用于实例化连接到传感器和执行器的网桥或网关设备。该设备在 UPnP 网络与传感器/执行器端点之间实现桥接。它提供检查状态以及从传感器发送和接收数据的服务。传感器/执行器可使用各种传输协议连接，包括蓝牙、ZigBee 和 IEEE 11073。此处定义的设备提供以下功能：1. 访问和控制多个传感器和执行器。2. 暴露传感器和执行器的配置信息。 [外文原描述]： ISO/IEC 29341-30-2:2017 defines the device for IOT Management and Control, which identifies Level 1 of the device named IOT Management and Control. This Publicly Available Specification is applicable to Standardized DCPs of the UPnP Forum which include this device. This device definition is compliant with the UPnP Device Architecture version 1.0 [1]. It defines a device type referred to herein as IOT Management and Control device. This specification defines a general-purpose device that can be used to instantiate a bridge or gateway device that is connected to Sensors and Actuators. This device implements a bridge between the UPnP network and Sensors/Actuators endpoints. It exposes services to check the status, and send and receive data from Sensors. Sensors/Actuators may be connected using a variety of transport protocols including Bluetooth, ZigBee and IEEE 11073.
英文名称Information technology - UPnP Device Architecture - Part 30-2: IoT management and control device control protocol - IoT management and control device