标准摘要
[中文适用范围]： 本文件列出了在射频（RF）通信层上对PT读写器或PT对象进行的所有测试条件，以确保被测PT设备符合ISO/IEC TS 24192-1中指定的所有要求。本文件仅适用于PT设备：——作为基于ISO/IEC 14443（所有部分）的无接触票务管理系统的终端设备的PT读写器；——作为基于ISO/IEC 14443（所有部分）的无接触票务介质的PT对象。本文件仅适用于ISO/IEC 14443（所有部分）中描述的无接触通信层。一旦在射频级别建立无接触通信，应用程序之间的交互不在本文件范围内。然而，在对RF通信层进行测试时，使用一个测试应用来完成端到端事务。本文件不重复ISO/IEC 14443（所有部分）或ISO/IEC 10373-6的内容。它引用了ISO/IEC 10373-6中适用的测试方法，指定了要使用的测试条件，并描述了可以运行的其他特定测试条件。 [外文原描述]： This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in ISO/IEC TS 24192-1 are met for the PT device under test. This document applies to PT devices only: — PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 (all parts); — PT objects which are contactless fare media acting as a PICC contactless object based on ISO/IEC 14443 (all parts). This document applies solely to the contactless communication layers described in ISO/IEC 14443 (all parts). Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. However, a test application is used to make end-to-end transactions during tests on the RF communication layer. This document does not duplicate the contents of ISO/IEC 14443 (all parts) or ISO/IEC 10373‑6. It makes reference to the ISO/IEC 10373‑6 applicable test methods, specifies the test conditions to be used and describes the additional specific test conditions that can be run.
英文名称Cards and security devices for personal identification - Communication between contactless readers and fare media used in public transport - Part 2: Test plan for ISO/IEC 14443 (all parts)