机动车辆制动系统液压阀试验规程

[中文适用范围]： 该文件已被宣布为“稳定”，并且将不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。该 SAE 推荐实践规定了确保阀门组件满足车辆使用要求的测试程序，并且适用于商业生产的新阀门组件。它涵盖了使用机动车辆液压制动液的乘用车和轻型卡车制动系统中使用的此类阀门。此程序和要求 (SAE J1137) 是针对符合以下要求的制动液而制定的： [外文原描述]： The SAE Recommended Practice specifies the test procedure to assure valve assemblies which are satisfactory for vehicle usage, and it is applicable to new valve assemblies for commercial production. It covers such valves where they are employed in passenger car and light truck brake systems utilizing motor vehicle hydraulic brake fluids. This procedure and requirements (SAE J1137) was developed for brake fluids conforming to SAE J1703 and FMVSS 116 (DOT 3); however, it may be utilized for valves which use DOT 4 or DOT 5 brake fluid.These procedure specifications were developed for base brake operation and do not consider the effects of ABS (anti-lock brake systems) or traction control systems which may have a significant effect on the valve. Careful analysis of the particular type ABS and/or traction control (if included in the system) should be made and additional tests are required which are not included in this document. Provisions for ABS and traction control will be incorporated in a future revision or covered in a separate document.The minimum performance requirements are specified in SAE J1137.Cross Reference: FMVSS116,J1137,J1703_201408