标准摘要
[中文适用范围]： SAE J1926 的这一部分规定了符合 ISO 725 标准的带有英制螺纹的流体动力和通用端口的尺寸，用于与 SAE J1926-2 和 SAE J1926-3 中所示的可调节和不可调节螺柱端部一起使用。符合 SAE J1926 本部分的端口可用于不可调节螺柱端部高达 63 MPa 的工作压力，以及可调节螺柱端部高达 40 MPa 的工作压力。允许的工作压力取决于材料、设计、工作条件、应用等。 [外文原描述]： This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends and plugs shown in SAE J1926-2, SAE J1926-3, and SAE J1926-4.Ports in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 40 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new designs in hydraulic fluid power applications.Cross Reference: 1926-3,ASMEB1.1,ISO1101,ISO1179-1,ISO1179-2,ISO1179-3,ISO1179-4,ISO11926-2,ISO11926-3,ISO1302,ISO19879,ISO2306,ISO263,ISO5598,ISO5864,ISO6149-1,ISO6149-2,ISO6149-3,ISO68-2,ISO8434-2,ISO9974-1,ISO9974-2,ISO9974-3,J1453,J1926-2,J514
英文名称Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing