标准摘要
[中文适用范围]： 本 SAE 推荐实践适用于评估两个表面之间存在的配合匹配条件的符合性。这种符合性的评估在粘合应用中可能特别有用，尽管它也可能与螺栓连接的相邻表面接头条件相关。由于良好的粘合表面 conformity 对于提供压力敏感粘合剂的最佳粘合性能是必要的，因此本文档的目的是提供一种评估配合表面匹配度的方法。本文档作为标准实践指南，但可能会根据经验和技术进步频繁更改。使用时应考虑到这一点。文档中包含了工具类型、材料、应用工具和组件接触面积评估方法。在大多数情况下，接触性能的目视评估可能就足够了；然而，为了获得更高的精度，可以使用测量工具。当报告接触值时，应注明评估模式（例如，目视、测量工具）。本文件旨在建立测试两个表面之间存在的表面匹配符合性的统一做法。 [外文原描述]： This SAE Recommended Practice applies to evaluation of the conformance match condition existing between two surfaces. Evaluation of this conformance may be especially useful in bonded applications although it may also have relevance to bolted adjacent surface joint conditions.Since good bonding surface conformity is necessary for providing optimal bond performance with pressure sensitive adhesives, the purpose of this document is to provide a method of evaluating the conformance match of the mating surfaces.This document is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this document.Tool types, materials, application tools, and component contact area evaluation methods are included as part of this document.In most cases a visual evaluation of contact performance may be satisfactory; however, for greater accuracy a measurement tool may be used. When reporting a contact value the mode of evaluation (e.g., visual, measurement tool) should be indicated.Cross Reference:
英文名称Surface Match Verification Method for Pressure Sensitive Adhesively Attached Components