焊接闪光控制、高强度低合金钢液压管、亚临界退火以用于弯曲、双扩口和弯曲

[中文适用范围]： 本 SAE 标准涵盖亚临界退火或正火电阻焊闪光控制单壁高强度钢管，用于液压管线和其他需要钢管质量适合弯曲@双扩口@冷成型@焊接和钎焊。由于内径焊道可能导致泄漏路径，因此按本规格生产的材料不适用于单火炬应用。 ISO 10763（公制管）和 SAE J1065（英制管）中列出了该管的标称参考工作压力。该规范还涵盖 SAE J2613 A 型管材。标准SAE J2613和SAE J2613 Type-A的机械性能和性能要求相同。 A 型管的指定差异并不意味着 A 型管无论如何不如标准 SAE J2613。 A 型名称旨在解决亚临界退火管材和正火管材之间独特的制造差异。注意：亚临界退火钢通常使用低于给定钢的下临界温度 (AC1) 的退火温度来生产，以达到所需的强度水平。焊接@钎焊@或其他使管材料或组件承受接近或高于AC1的温度的加工方法可能会引发管微观结构的等温转变，并通过进一步对管进行退火而损害热影响区中管的强度。因此@ ISO 10763 和SAE J1065 标称参考工作压力可能不适用。建议用户和制造商验证并同意管组件设计和压力额定值不会超出这些过程的系统设计。 SAE J2551-2 中描述的性能测试将有助于提出适当的测试建议。根据特定几何形状和需要与亚临界退火材料相关的热连接方法的组件制作的管组件配置可能需要根据 ISO 19879 进行资格测试。使用 A 型材料可以避免这种系统测试，因为热工艺不会妥协A 型管材料的结构完整性。为了在全球市场内实现标准化并确保公司能够在国际市场上保持竞争力，我们打算转换为公制管尺寸，这将： ?导致一个全球系统？引导用户使用首选系统 ?降低复杂性？消除库存重复 [外文原描述]： This SAE Standard covers sub-critically annealed or normalized electric resistance welded flash controlled single-wall high strength steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J1065 for inch tubing.This specification also covers SAE J2613 Type-A tubing. The mechanical properties and performance requirements of standard SAE J2613 and SAE J2613 Type-A are the same. The designated differences of Type-A tubing do not imply that Type-A tubing is in anyway inferior to standard SAE J2613. The Type-A disignation is meant to address the unique manufacturing differences between sub-critically annealed and normalized tubing.Tube assembly configurations made to specific geometry and components requiring thermal attachment methods in association with the sub-critically annealed material, may require qualification testing in accordance with ISO 19879. The use of Type-A material avoids this systemic testing as thermal processes will not compromise the structural integrity of the Type-A tube material.In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will:Lead to one global systemGuide users to preferred systemReduce complexityEliminate inventory duplicationsCross Reference: ASTMA513,EN10305-2,EN10305-3,EN10305-4,EN10305-6,ISO10583,ISO10763,ISO19879,ISO3304,ISO3305,ISO4200,ISO4397,ISO4399,ISO5598,ISO6162,ISO6163,ISO6164,ISO6605,ISO8434,J1065_201605,J1453-1,J1453-2,J1453-3,J1453/2_201504,J1677_201612,J2435_201508,J2551_201309,J2832_201902,J356_201312,J409_202107,J514,J518,J533_201702