第 50 位男性假人的低速膝关节滑块测试程序

[中文适用范围]： 此程序建立了对 Hybrid III 50th 男性拟人测试设备（ATD 或碰撞假人）进行低速膝关节滑块测试的推荐实践。该测试的创建是为了满足行业对认证测试的需求，该认证测试可产生与实际低能量汽车冲击测试类似的结果。当前认证程序存在固有问题，因为正常 (2.75 m/s) 膝盖滑块测试的测试走廊不能代表这些低能量冲击测试中看到的典型位移。正常测试走廊规定了10毫米和18毫米@的力要求，而低速测试需要有10毫米左右的峰值位移。目的 本推荐实践的目的是为偏转范围为 10 mm 的 H-III50M 假人开发低速膝盖滑块测试程序。 [外文原描述]： This procedure establishes a recommended practice for performing a Low Speed Knee Slider test to the Hybrid III 50th Male Anthropomorphic Test Device (ATD or crash dummy). This test was created to satisfy the demand from industry to have a certification test which produces similar results to an actual low energy automotive impact test. An inherent problem exists with the current certification procedure because the normal (2.75 m/s) knee slider test has test corridors that do not represent typical displacements seen in these low energy impact tests. The normal test corridors specify a force requirement at 10 mm and at 18 mm, while the low speed test needs to have a peak displacement around 10 mm.Cross Reference: J211/1_202208,MVR No. 572