伏电动启动马达的重型卡车和公共汽车电路性能要求

[中文适用范围]： 本 SAE 建议实践的范围是描述一个设计标准，以定义 12 至 24 V 启动器系统的启动电机主电路@以及控制系统电路@的最大建议压降。 [外文原描述]： The recommended practice describes a design standard that defines the maximum recommended voltage drop of the starting motor main circuits, as well as control system circuits, for 12/24-V starter systems. The battery technologies used in developing this document include the flooded lead acid, gel cell, and AGM. Starting systems supported by NiCd, Lithium Ion, NiZn, etc., or Ultracaps are not included in this document. This document is not intended to be updated or modified to include starter motors rated at voltages above the nominal 24-V electrical system. The starter is basically an electrical-to-mechanical power converter. If you double the available battery power in, you double the peak mechanical power out and double the heat losses. This means that we have to pay special attention to how battery power changes when we change the battery voltage and the effects it may have in overpowering the cranking system. A new stand-alone document would need to be developed to address electrical circuit performance for starter motor systems with ratings above the nominal 24-V system.