标准摘要
[中文适用范围]： 该标准涵盖了用于建筑、工业设备和商业产品液压系统中一般应用的多种软管的一般尺寸和性能规格。这些通用规范是 SAE 100R1@ SAE 100R2@ SAE 100R3@ SAE 100R4@ SAE 100R5@ SAE 100R6@ SAE 100R7@ SAE 100R8@ SAE 100R9@ SAE 100R10@ SAE 100R11 和 SAE 100R 详细规范的通用规范，并应补充这些规范12 液压以下各节中阐述的软管。软管应用 ?C 液压软管的使用寿命是有限的，会缩短软管寿命的因素有： (1) 将软管弯曲到小于规定的最小弯曲半径。 (2) 扭转@拉动@扭结@压碎@或磨损软管。 (3) 在高于或低于软管工作温度范围的情况下运行。 (4) 将软管暴露在高于最大工作压力的浪涌压力下。 [外文原描述]： This SAE Standard provides general, dimensional, and performance specifications for the most common hoses used in hydraulic systems on mobile and stationary equipment.The general specifications contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifications for the 100R-series hoses contained in the later sections of this document (see Tables 1 and 2 ).This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user.The maximum working pressure of a hose assembly comprising SAE J517 hose and hose connectors per SAE J516, SAE J518, SAE J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values.When using SAE J517 hose for marine applications, refer to SAE J1475, SAE J1942, and SAE J1942-1.The SAE J517 100R9, 100R10, and 100R11 hoses were discontinued due to lack of demand. For DOD orders, see Appendix C .The SAE J517 100R1A, 100R2A, 100R2B, and 100R 2BT were discontinued due to lack of demand. For DOD orders, replace 100R1A with 100R1AT, and replace 100R2A, 100R2B, and 100R2BT with 100R2AT.The SAE J517 100R1AT maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R1 as type S.The SAE J517 100R2AT maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R2 as type S.The SAE J517 100R16 maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label 100R16 as type S.Cross Reference: ASTMD380,ASTMD471,ASTMD792,DAPS FEDERAL STANDARD 595,FederalStandard,ISO11237,ISO1402,ISO1436,ISO1817,ISO3862,ISO3949,ISO4079,ISO4397,ISO4671,ISO6803,J1176,J1273_201409,J1401,J1453-1,J1453/1_201906,J1475_201406,J1927_201406,J1942/1_201512,J1942/1_202012,J1942_201406,J343_201605,J516_201604,J518,J518_201303,J846_201303,J846_201511,MIL-H-8446,MIL-PRF-7808,MIL-PRF-83282
英文名称Hydraulic Hose