单板弹簧支撑离合器用飞轮

[中文适用范围]： 该文件已被宣布为“稳定”，并且将不再接受货币定期审查。用户负责验证参考资料和持续适用性或技术要求。新技术可能存在。本 SAE 推荐做法适用于内燃机上使用的干式弹簧加载离合器的飞轮。图 1 和表 1、表 2 和表 3 报告了业界当前使用的信息。还生产需要其他尺寸的离合器。给出的尺寸主要适用于单片离合器。如果离合器随附用于中间板和第二从动盘的适配器，则双板离合器的飞轮具有相同的尺寸。如果要延长飞轮以适应中间板和第二从动部件，请咨询离合器制造商，了解中间板所需的 J 尺寸和驱动装置。 [外文原描述]： This SAE Recommended Practice applies to flywheels for dry spring-loaded clutches used on internal combustion engines. Figure 1 and Tables 1 , 2 , and 3 report information currently used in the industry. Clutches requiring other dimensions are also manufactured. Dimensions given are primarily for single-plate clutches. Flywheels for two plate clutches have the same dimensions if an adaptor for the intermediate plate and second driven disc is supplied with the clutch. If instead the flywheel is to be extended to adapt the intermediate plate and second driven member, consult the clutch manufacturer for the required J dimension and drive arrangements for the intermediate plate. See SAE J1806 for flywheels for size 14 and 15.5 two plate pull-type clutches.Cross Reference: ANSI/ASMEB.1,ISO965-3,J1033,J1033_201206,J1806_201708