标准摘要
[中文适用范围]： 本 SAE 信息报告的目的是针对车身、车架和轮罩间隙以容纳轮胎防滑链，以及允许在两个车轴上使用防滑链的最小转向架间距制定指南。这些尺寸适用于卡车、公共汽车以及总重 10 001 磅（4535.06 千克）及以上的车辆组合，并且基于轮胎和轮辋协会以及全国链条制造商协会的建议。该图仅显示了轮胎上方链条的间隙，在确定挡泥板间隙时必须考虑弹簧变形。 [外文原描述]： The purpose of this SAE Information Report is to set up a guide as to body, frame, and wheel housing clearance to accommodate tire chains, and also the minimum bogie spacing to permit using chains on both axles. These dimensions apply to trucks, buses, and combinations of vehicles 10 001 lb (4535.06 kg) GVW and over, and are based upon recommendations of the Tire and Rim Association and of the National Association of Chain Manufacturers. The diagram shows clearance for chains over the tire ONLY and allowance must be made for spring deflections in determining fender clearance. See Figure 1 and Table 1 .Cross Reference:
英文名称Tire Chain Clearance - Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles